SBM Vibrating Feeder

Illustration of our vibrating feeder operation rules

Preparation before starting vibrating feeder:

1. check the note on duty and deal with problems last time.
2. make sure that there are no other objects between the machine and glide groove as well as spring and supporting base.
3. make sure all the firmware is fastened well.
4. make sure the level of the oil is higher than the sign.
5. make sure the belt conveyor is in good condition; if there is damage, change it in time. If there is dirt, make it clean.
6. make sure the protection device is installed well. If any abnormal phenomenon, solve it in time.

Starting the vibrating feeder:

1. after checking, if the machine and the transmission device are in good condition, the machine can be started.
2. the machine can be allowed only in no-loading condition.
3. after starting, if there is any abnormal phenomenon, stop the machine. After solving the trouble, restart it.

The vibrating feeder operation:

1. after the machine is stable, it can be run with materials;
2. the material quantity should accord with the loading trial operation requirement.
3. stop the machine in required sequence according to regulations. The machine cannot be stopped with materials or continue to feed materials after stopping the machine.